Pro-Bolt - Titanium, Stainless Steel, Aluminium Fasteners & Motorcycle Accessories - HelpInfo

• Ordering Information
• Terms & Conditions

• Frequently Asked Questions
• Security & Privacy

• Material & Sizing Information

Yes, we manufacture fasteners from 316 Stainless Steel and Grade 5 Titanium, these are equivalent to between 8.8 and 10.9 grade Steel. Our bolts are used by British and World Superbike Teams and various MX Teams and therefore tested at the highest levels. Where we specify a fastener can be used, we are confident our fasteners are equivalent to and in most cases superior to Original Manufacturers Equipment.

No, under normal circumstances and if cared for in the appropriate manner our anodising will not fade. When cleaning mild soapy water and a soft brush or cloth are recommended. Harsh cleaning chemicals and scouring pads are not recommended as is the case with Original Manufacturers Equipment.

Thread lock can be used as per original equipment recommendations, however if no thread lock is used an anti-seize lubricant of some sort is recommended. Most of our kits are supplied with Pro-Lube (copper slip). This is not a thread but a lubricant to prevent galling lock and bolt torques should be checked regulary.

Length: For fasteners where the head usually sits above the surface, the measurement is from directly under the head to the end of the fastener.

Countersunk bolts are measured including the head.

Diameter: The measurement across the width of the bolt from crest to crest along the thread of the bolt.

Thread Pitch: The measurement from crest to crest along the bolt of thread.

Diameter and Thread pitch are almost impossible without a gauge, we have designed Pro-Gauge specifically to make taking any fastener measurement as simple as possible. Please click on the link to view/order Pro-Gauge Measuring Tool

No, Pro-Bolt does not offer anodising as a service.

Pro-Bolt will supply backing clips in fairing kits ONLY where our bolts are not compatible with your originals. In all other cases your original backing clips can be used in conjunction with your new Pro-Bolt kit. If however your original backing clips are damaged you can order them from our ancillary pages.

Where possible Pro-Bolt will make nuts with integral washers, this will mean you do not need to order a separate washer.

Unfortunately due to their composition Aluminium and Titanium do not anodise to exactly the same shade, therefore variations will occur.

Yes we ship Worldwide, But please check Distributors in your Country first. Click on the link to check Distributors

To find the cost of delivery for any order, simply add the items you would like to your shopping basket (they can be removed at any time). Once you have added the items to your basket, you can select your country from the drop down list and your delivery charge will be calculated instantly.