Pro-Bolt Ltd GSXR600 K6/K7

Best Sellers

Alloy Set of 10mm Sprocket Nuts - SPN10 (Ref: 2632)
Alloy 6 Bolt Screen Kit - SK6 (Ref: SK6)
M6 x 16mm Fairing Bolts (16mm head diameter) (Ref: LFB616)
Alloy Mudguard & Hugger Kit - MUDHUG (Ref: MUDHUG)
M6 Nyloc Nut- 1.0mm pitch (Ref: LNYN6)
M6 Countersunk Washer - 22mm o/d (Ref: LWAC6-22)
Alloy 8 Bolt Screen Kit - SK8 (Ref: SK8)
M5 x 16mm Fairing Bolts (12mm head diameter) (Ref: LFB516)
M6 x 20mm Fairing Bolts (16mm head diameter) (Ref: LFB620)
Alloy Oil Filler Cap Kawasaki Standard LOFCK10 (Ref: LOFCK10)
M6 x 25mm Socket Cap Bolt (Ref: LPB625)
Alloy One Piece Cable Adjuster - LCA20 (Ref: 1759)
M6 Flat Washer -18mm o/d (Ref: LWA6-18)
Three-Bond Threadlock - Medium Strength - 10ml (Ref: 10738)
Alloy Oil Filler Cap Suzuki Standard LOFCS10 (Ref: LOFCS10)
M6 x 15mm Countersunk Bolt (Ref: LCS615)
M8 x 40mm Fairing Bolts (16mm head diameter) (Ref: LFB840)

GSXR600 K6/K7

HM Quickshifter PLUS SH Ref: HMQUICK30
STANDARD & POWER COMMANDER
Built-In Intelligent Ignition Controller
Directly controls Ignition for all bikes with plug top coils
The Advantages of a Strain Gauge Quickshifter
NO MOVING PARTS, so they are ultra consistent and reliable
DOES NOT rely on movement of the gear lever, so every gear change occurs exactly at the right time
No missed gears
The kindest way to treat a gearbox
Ultra smooth, slick shifts every time
No mechanical set-up at all
Fully adjustable to suit both you and your bike
Built in LCD for simple adjustment BOLT ON, PLUG IN and USE
No cutting or splicing of wires
HM Quickshifters are easy to fit. There is no need to cut, or splice any wire. It's a simple matter of unplugging the existing connectors, plug into supplied loom, refit, connect to earth and it's done.
With the HM Quickshifter LCD it is possible to adjust settings for either road, or race shift. You can also adjust the sensitivity for cut and duration of cut.
More...

http://www.tastynuts.com/hm2008fitments
GBP Price £340.42 (£391.48 Including VAT at 15%)

Quantity:

HM Quickshifter PC Ref: HMQUICK40
For direct connection to Dynojet Power Commander, Rapid Bike, Kit ECU's, HRC Loom
Note: If your bike has power commander fitter and 8 injectors you will nered to use 'HMQuickshifter Plus'
The Advantages of a Strain Gauge Quickshifter
NO MOVING PARTS, so they are ultra consistent and reliable
DOES NOT rely on movement of the gear lever, so every gear change occurs exactly at the right time
No missed gears
The kindest way to treat a gearbox
Ultra smooth, slick shifts every time
No mechanical set-up at all
Fully adjustable to suit both you and your bike
Built in LCD for simple adjustment BOLT ON, PLUG IN and USE
No cutting or splicing of wires
HM Quickshifters are easy to fit. There is no need to cut, or splice any wire. It's a simple matter of unplugging the existing connectors, plug into supplied loom, refit, connect to earth and it's done.
With the HM Quickshifter LCD it is possible to adjust settings for either road, or race shift. You can also adjust the sensitivity for cut and duration of cut.

More...

GBP Price £255.31 (£293.61 Including VAT at 15%)

Quantity:

Aluminium X-Pad Crash Protectors - with Shock Absorber Ref: 41SU19
The new crash pad generation: the Metisse X-PAD with integrated shock absorber.

Easy to fit. A top-quality model specific fitting kit is always included, also an illustrated, easy to understand fitting instruction.

Others produce only simple stiff crash pads which have one disadvantage: in case of a crash the hard and high impact energy hit's directly (or via adaptor plates) the mounting points on the frame / engine. In worst cases those frame-/ engine lugs can crack and break.

This safety risk is extensively eliminated with the new X-PAD technology. Between his plastic bottom and the 6-times mounted floating head a shock absorber is installed. This allowes the X-PAD a for crash pads never known attribute: in case of a crash the pad compresses in a progressive way, absorbes the high impact energy and transformes it into a softer impact (see diagram). This prevents in nearly all cases the above mentioned frame cracks.

The Metisse X-PAD is the only crash pad that can offer this attribute, a MUST for everyone who want’s to ride save.
More...

GBP Price £63.82 (£73.39 Including VAT at 15%)

Colour

Quantity:

Titanium Front Caliper Mount Bolt Kit in Colour Finish in Colour Finish- TIFBMON190BG Ref: 7221
Picture is a representation, actual Kits vary.

Kit Contains:
Qty:
4 M10x70 Flanged Hex Head Bolts Fine Thread.
Lubricant and Stickers.

40% lighter than Manufacturer Original Equipment and highly resistant to corrosion.
Torque to same as manufacturers originals.
These are the bolts that mount the caliper to the fork, both sides where applicable.
Price is for Blue, Gold or Purple Haze finish.

More...

GBP Price £48.61 (£55.90 Including VAT at 15%)

Colour

Quantity:

People who bought this item also bought:

1. Titanium Yamaha Banjo Bolt - Single M10 x 1.25 in Coloured Finish - TIBANJOS20FBG (Ref: TIBANJS20B)

2. New! Aluminium Reservoir Clip (Ref: RESCLIP10)

3. Free Anodised Aluminium 25pc Workshop Kit for all Orders over £100 (exc P&P & VAT) (Ref: FREEWS25)

Best Sellers

New Products

GSXR600 K6/K7